The Kanya PVS connector system allows you to join any two profiles together to build structures in a short space of time. We offer eight different types of connectors, with four available here on our online store to purchase quickly. For the complete connector range, please contact us or download the full catalogue.
PRODUCT SELECTION GUIDE
Choosing components for your aluminium build project couldn’t be simpler with Kanya.
By using a simple lettering system as the product code, all products with the same letter can be used together.
All 50mm base extrusion products start with the letter “A”
All 40mm base extrusion products start with the letter “C”
All 30mm base extrusion products start with the letter “B”
All 20mm base extrusion products start with the letter “D”
All heavy duty extrusion products start with the letter “M”
The entire range of Kanya products uses the unique PVS connector system allowing the joining together of extrusions to be easy, secure and quick.
Choose from the following options:
The round anchor head allows the extrusions to be set in any position once it is pushed into the retaining slot
The milled anchor heads allow extrusions to be added subsequently. Horizontally and vertically milled anchor types are required to guarantee that every extrusion position is possible
To provide the optimum connection for all cross sections, the combination connectors are used in a similar way to the standard connectors
The special anchor, which is available in different lengths, makes parallel and cross connections possible
The formed anchor head – 15,30 and 45 degrees in both left and right designs, or with an articulated head to create connections at virtually any angle
Double mitred connectors
The anchor which can be swivelled from 0-90 degrees can be used universally and creates a sturdy frame with slots all around
The rigid anchor guarantees an extremely stable extrusion extension
The threaded anchor (M6/M8) enables the extrusion to be attached to other structures
When you order your extrusion products, you can specify machining requirements by following our KANYA Extrusion Machining Codes information guide. Here is an overview of how it all works…
Your item number should be made up of the following, identified in the diagram above:-
- Select the appropriate design or special extrusion type
- Define the machining on the left side of the extrusion (see above), as per the machining guide. If the left side requires no machining, then code -02 should be used
- Define the machining on the right hand side of the extrusion (see above) as per the machining guide. If the right side requires no machining, then code -02 should be used
- Indicate the required extrusion length in mm/L
- For special machining, code-99 should be used